Introduction

Silence from your Onn Roku TV when you expect sound is frustrating, especially when the picture looks fine. Sound issues range from simple mute settings to more complex problems with HDMI, soundbars, or the Roku system itself. The good news is that you can fix most ‘Onn Roku TV sound not working’ problems at home with simple, clear steps.

This guide walks you through fast checks first, then deeper fixes. You will move from basic volume and cable checks into TV audio settings, external devices, soundbar and receiver issues, app and system glitches, and finally hardware problems. Follow each section in order and test the sound after every change. That way, you will know exactly which step fixed the problem.

With that plan in mind, start with the most common causes: quick checks that often restore sound in a few seconds.


onn roku tv sound not working

Step 1 – Run Through the Quick Sound Checks

Before you dive into menus or think about replacing hardware, rule out the simple mistakes that cause many audio issues. These checks are fast and often solve the problem without any deep troubleshooting.

  1. Confirm the TV is not muted or on very low volume
  2. Press the volume up button on the Onn Roku TV remote several times.
  3. Watch the on-screen volume bar to confirm it changes.
  4. Press the mute button once to be sure mute is off. An icon on the screen usually shows when mute is active.

  5. Check the remote buttons and physical TV controls

  6. If the volume indicator does not move when you press the remote, the remote may be the problem.
  7. Replace the remote batteries and test again.
  8. Use the physical buttons on the TV itself (often under or on the back edge). If those work but the remote does not, the TV is fine and you need to fix or replace the remote.

  9. Make sure the correct input or source is selected

  10. Press the ‘Home’ button on your Roku remote.
  11. Use the arrows to highlight the correct HDMI input or app you want to use.
  12. If you are looking at a black or frozen image from the wrong input, the TV may show a picture or menu but play no sound from your actual device.

  13. Inspect HDMI and other audio cables

  14. Gently press each HDMI plug into its port to ensure a tight fit.
  15. Look for bent pins, frayed ends, or obvious damage on the cables.
  16. If a cable looks worn or feels loose, swap it with a known good cable and test again.

If these basic checks do not bring the sound back, the next likely cause is a setting in your TV software. The following section focuses on the Onn Roku TV audio menus and how to set them correctly.


Step 2 – Check Onn Roku TV Audio Settings

When volume, mute, and cables look normal, the TV may be sending audio to the wrong output or using a format your setup cannot handle. Misconfigured audio options are one of the most common reasons people search for ‘Onn Roku TV sound not working’.

  1. Open the Roku Settings menu
  2. Press the ‘Home’ button on the remote.
  3. Scroll down to ‘Settings’ and select it.
  4. Choose ‘Audio’. This menu controls most sound behavior on your Onn Roku TV.

  5. Select TV speakers as the active audio output

  6. In the Audio menu, look for ‘Audio output’ or a similar option.
  7. Select ‘TV speakers’ if you are not using a soundbar, receiver, or external speakers.
  8. If the TV is set to ARC, optical, or Bluetooth without any matching device connected, you may get silence even though the TV itself works.

  9. Review audio mode options

  10. Still under ‘Audio’, look for items like ‘Audio mode’, ‘TV speakers’, or ‘Digital output format’.
  11. Test these common options:
  12. ‘Auto
  13. ‘Stereo
  14. ‘Surround’ (may appear as different names depending on version)
  15. For troubleshooting, choose ‘Stereo’ or ‘PCM’. These formats are the most compatible with most TVs and sound systems and help rule out format conflicts.

  16. Reset audio settings to default

  17. Go to ‘Settings’ → ‘System’ → ‘Advanced system settings’.
  18. Look for ‘Factory reset’ and then choose the option that resets only ‘Audio/picture settings’ if available, not the entire TV.
  19. Confirm and allow the TV to reset those options.
  20. After the reset completes, test the sound again.

If your TV audio settings appear correct but you still lack sound, think about what is connected to your Onn Roku TV. Many issues only show up when you use a specific external device such as a cable box or a gaming console. The next section focuses on those devices.


Step 3 – Fix Sound Issues With External Devices

External devices send audio into your Onn Roku TV through HDMI or other inputs. If something is wrong with the device, its settings, or the way it connects, your TV may show a perfect picture but play no sound.

  1. No sound from a cable box, streaming device, or game console
  2. Confirm the device is turned on and not in standby.
  3. Check whether the device has its own volume control and raise it if needed.
  4. If the device has a mute option, turn that off.

  5. Verify the correct HDMI input and device audio format

  6. On the Roku home screen, highlight the HDMI tile that matches the port your device uses.
  7. If you are unsure, unplug and reinsert the HDMI cable and watch which tile responds or appears active.
  8. On the external device, open its audio or sound settings and set the output format to ‘Stereo’ or ‘PCM’. Advanced formats like Dolby Atmos or DTS often cause problems if your TV or sound system cannot decode them.

  9. Try different HDMI ports and swap cables

  10. Move the HDMI cable to another HDMI port on the TV.
  11. Select that new input on the home screen and test the sound.
  12. If sound works on the new port but not on the old one, the original port may be faulty.
  13. If sound still fails, replace the cable with another one and test again to rule out a bad cable.

  14. Test another device on the same HDMI input

  15. Connect a second device, such as a different streaming stick or a laptop, to the same HDMI port.
  16. If the second device has sound, the original device likely has its own audio problem.
  17. If neither device works on that port, the issue points to the TV port or its settings.

If your sound problem appears only when you use a soundbar or AV receiver, the simple HDMI tests above may not be enough. Soundbars introduce features like ARC and CEC, which need their own careful setup. The next section focuses on those connections.


Step 4 – Troubleshoot Sound With Soundbars and Receivers

Soundbars and receivers improve audio, but they add complexity. Many ‘Onn Roku TV sound not working’ issues involve HDMI ARC, optical cables, or Bluetooth that are not fully configured. To fix these, you need to understand which connection type you use and adjust both the TV and the audio device.

  1. Identify the type of audio connection
  2. HDMI ARC or eARC: A single HDMI cable runs between the TV and the soundbar or receiver. It must plug into the TV port labeled ‘ARC’.
  3. Optical (TOSLINK): A thin cable with square ends carries audio only from the TV to the soundbar or receiver.
  4. Bluetooth: A wireless link between the TV and a Bluetooth speaker or soundbar.

  5. Enable and verify HDMI ARC and CEC controls

  6. On your Onn Roku TV, go to ‘Settings’ → ‘System’ → ‘Control other devices (CEC)’.
  7. Turn on all CEC options, including anything labeled ‘ARC (HDMI)’ or ‘System audio control’.
  8. On your soundbar or receiver, open its own settings menu and enable ARC or HDMI control (sometimes called CEC or Anynet+, Bravia Sync, etc., depending on brand).
  9. Make sure the HDMI cable goes from the TV’s ‘ARC’ port to the soundbar or receiver’s ‘ARC’ port, not a regular HDMI input.

  10. Change digital audio output format for stability

  11. On the TV, return to ‘Settings’ → ‘Audio’.
  12. Under HDMI or digital output options, change the format to ‘PCM’ or ‘Stereo’ for testing.
  13. Avoid passthrough or advanced formats if you get no sound, cutting out, or distorted audio.
  14. If sound returns on PCM, your soundbar or receiver may not support the previous format or may handle it poorly.

  15. Use optical audio as a fallback when ARC is unreliable

  16. If HDMI ARC keeps failing or cutting out even after you set CEC correctly, consider using optical instead.
  17. Connect an optical cable from the TV’s optical output to the soundbar or receiver’s optical input.
  18. On the TV, set ‘Audio output’ to ‘Optical’.
  19. While optical cannot carry Dolby Atmos and some advanced formats, it is often more stable for basic surround or stereo.

Once you have checked physical connections and soundbar settings, you should also look at software. Some audio issues appear only inside certain apps or after a system update. The next section addresses those software-related problems.


Step 5 – Fix App-Specific and Roku OS Audio Problems

When sound works in some places but not others, the difference often comes from apps or the Roku operating system. For example, you may hear audio on live TV or one streaming app but get silence on another. In that case, the hardware is likely fine, and the fix lies in software changes.

  1. No sound in specific streaming apps
  2. Open several streaming apps such as Netflix, YouTube, and the Roku Channel.
  3. If only one app has no sound, close it by pressing the ‘Home’ button.
  4. Reopen that app and try a different video.
  5. If it still fails, sign out of the app, sign back in, and test again.

  6. Check volume modes inside playback

  7. Start playing a show or movie.
  8. Press the star (*) button on your Roku remote to open the options menu.
  9. Find ‘Volume mode’ and test these settings:
  10. ‘Off
  11. ‘Leveling
  12. ‘Night
  13. If sound seems flat, uneven, or too quiet, switch to ‘Off’ for testing. Volume modes can sometimes change how audio appears or make quiet content even harder to hear.

  14. Update Roku OS and apps

  15. Go to ‘Settings’ → ‘System’ → ‘System update’ → ‘Check now’.
  16. Install any available system updates.
  17. After this process, Roku also checks your apps and updates them if updates exist.
  18. When the TV restarts after updates, test audio in multiple apps.

  19. Reinstall problematic apps

  20. On the home screen, highlight the app with sound issues.
  21. Press the star (*) button and select ‘Remove channel’.
  22. After removal, go to ‘Settings’ → ‘System’ → ‘Power’ → ‘System restart’ and restart the TV.
  23. Return to the Roku Channel Store, install the app again, sign in, and test the sound.

If software fixes do not solve the problem, deeper system issues or conflicts may be present. In that case, restarting or resetting parts of the system can clear out hidden errors. The next section guides you through those reset options.


Step 6 – Restart, Power Cycle, and Reset Options

You have adjusted settings, checked devices, and refreshed apps. If audio still fails, a system-level restart or reset may be needed to clear lingering glitches. These steps often fix stubborn issues without any hardware work.

  1. Soft restart the Onn Roku TV
  2. Open ‘Settings’ → ‘System’ → ‘Power’.
  3. Select ‘System restart’.
  4. Confirm and let the TV shut down and boot back up.
  5. After the restart, test sound with an app and an HDMI input.

  6. Power cycle the TV and external devices

  7. Turn the TV off and unplug it from the wall.
  8. Unplug any connected devices such as soundbars, receivers, cable boxes, or game consoles.
  9. Wait at least 60 seconds to allow any residual power to discharge.
  10. Plug the TV back in and turn it on first.
  11. Then plug in and power on your external devices one by one, testing audio as you go.

  12. Network reset vs audio settings reset

  13. If streaming apps buffer or fail along with audio issues, go to ‘Settings’ → ‘System’ → ‘Advanced system settings’ → ‘Network connection reset’ and follow the prompts. Then reconnect to your Wi-Fi network.
  14. To reapply audio defaults without wiping your entire TV, use the ‘Reset TV audio/picture settings’ option if available, as described earlier, instead of a full factory reset.

  15. When and how to perform a full factory reset

  16. Use a full factory reset only when all other steps fail and you are confident it is not just one app or device causing trouble.
  17. Go to ‘Settings’ → ‘System’ → ‘Advanced system settings’ → ‘Factory reset’.
  18. Choose ‘Factory reset everything’ and follow the on-screen instructions.
  19. After the reset, set up your Roku account, Wi-Fi, and apps again.
  20. Test sound early in the setup before adding lots of channels or making advanced changes, so you know if the base system works.

If a full reset does not restore audio, the odds increase that you are dealing with a physical problem. The next section will help you check for signs of hardware failure in the speakers or internal components.


Step 7 – Diagnose Hardware and Speaker Problems

When settings, cables, external devices, and resets all fail, hardware becomes the most likely cause. Onn Roku TVs are budget-friendly, and while many work well for years, internal speakers or boards can fail, especially after physical damage or heavy use.

  1. Signs the built-in speakers may be damaged
  2. Persistent crackling, buzzing, or rattling at normal volumes.
  3. Sound that cuts in and out when you gently tap the TV frame.
  4. Audio coming from only one side of the screen instead of both speakers.

  5. Test with headphones, Bluetooth speakers, or a soundbar

  6. Plug headphones into the TV’s headphone jack if it has one, or connect a Bluetooth speaker if your model supports Bluetooth audio.
  7. If sound works well through headphones or an external speaker but not through the TV speakers, the internal speakers are likely faulty.
  8. If there is no sound on any output, the problem may be the main board or audio circuitry inside the TV.

  9. Look for impact, heat, or liquid damage

  10. Check the TV’s casing for cracks, dents, or other signs of impact.
  11. While the TV is running, gently touch the back panel to feel for extreme heat. Excessive heat can point to failing components.
  12. Inspect ports and edges for signs of liquid damage, such as stains or corrosion.

  13. When repair is not worth the cost

  14. For many Onn Roku TV models, out-of-warranty repairs can approach the price of a new TV.
  15. If your TV is still under warranty, contact the support number in your documentation or reach out through Walmart’s support channels.
  16. If the TV is out of warranty and the repair quote is high, consider putting that money toward a new TV or a better sound system.

If you manage to restore sound by switching outputs or using external speakers, you will want to keep your setup stable. The final section covers simple habits that help you avoid future sound issues and maintain reliable audio.


Step 8 – Prevent Future Sound Issues on Your Onn Roku TV

Once you solve a ‘sound not working’ problem, it makes sense to prevent the same issue from returning. A few simple practices keep your Onn Roku TV audio stable and make future troubleshooting easier.

  1. Keep Roku OS and apps up to date
  2. Check for system updates regularly through ‘Settings’ → ‘System’ → ‘System update’.
  3. After major updates, quickly test audio on several apps and inputs to spot problems early.

  4. Use quality HDMI cables and secure connections

  5. Invest in certified high-speed HDMI cables instead of very cheap or old ones.
  6. Avoid forcing cables into ports or letting heavy cables hang and pull on the connectors.
  7. Label each cable with the device it belongs to so you can reconnect everything exactly the same way if you move your TV.

  8. Avoid overheating and physical stress on the TV

  9. Place your TV where air can flow freely around it. Do not trap it in tight cabinets without ventilation.
  10. Keep the area around vents free of dust buildup, which can increase heat.
  11. Be careful when moving or cleaning the TV so you do not twist or strain ports and speaker areas.

  12. Save a ‘known good’ setup and settings list

  13. Once your sound works the way you like, write down key details such as:
  14. Which HDMI port each device uses.
  15. Whether you use TV speakers, ARC, optical, or Bluetooth.
  16. Your chosen audio format (PCM, Stereo, or Auto).
  17. If problems appear later, you can compare the current setup to your list and quickly restore the working configuration.

Conclusion

Onn Roku TV sound not working’ issues can be annoying, but most of them have straightforward solutions. By starting with simple checks like volume, mute, and cables, then moving through audio settings, external devices, soundbars, apps, system resets, and finally hardware, you can pinpoint the exact cause without guesswork.

If you discover a hardware failure, weigh the cost of repair against the price of a replacement, especially on budget models. In many cases, though, you will restore sound long before you reach that point. Use the steps in this guide whenever audio problems appear, and you will keep your Onn Roku TV delivering clear, consistent sound for movies, shows, and games.

Frequently Asked Questions

Why does my Onn Roku TV randomly lose sound even after I fix it?

Random sound loss usually comes from unstable HDMI connections, ARC glitches, or CEC conflicts. Make sure cables fit tightly and use quality HDMI cables. If you use a soundbar, disable CEC on other devices that you do not need for TV audio, such as older consoles. Set the TV’s digital audio output to PCM for stability, and perform a full power cycle of the TV, soundbar, and connected devices to clear temporary glitches.

How do I get my Onn Roku TV sound working again without doing a factory reset?

You can try several steps before a full reset. First, do a system restart from Settings → System → Power → System restart. Next, reset only the audio and picture settings from the advanced system menu instead of wiping the whole TV. Then change the audio output to TV speakers and the format to PCM or Stereo for testing. Finally, update Roku OS and any apps with problems. These actions often restore sound without erasing your channels and logins.

My Onn Roku TV only has no sound on HDMI but works on apps—what should I do?

If apps have sound but HDMI inputs do not, the issue lies in the HDMI chain. Switch to a different HDMI port and test again. Replace the HDMI cable with a known good one. On the TV, set HDMI or digital audio output to PCM or Stereo. Also open the HDMI device’s audio settings and avoid advanced formats your TV may not support. If every device fails on one specific HDMI port, that port may be damaged, so use another port as a workaround.